Note: This is a special order item for us so our website will always show that there is a backorder.
Laguna has exceeded expectations with the Revo Lathes. The all cast-iron design keeps vibration at an absolute minimum while the TEFC induction motor, equipped with a Delta VFD, ensures maximum torque even at low RPM. Webbings, ribs & castings are intentionally oversized. The Revo can be equipped with either a 12" swing-away extension that allows you to park your tailstock or a 20" extension which can be utilized in 5 separate locations.
The American developed Gates belt enables quicker belt change while providing superior transfer of power. The belt is narrow allowing for more space when going from High to Low speed. The Gates belt was originally intended for the auto industry.
The blue LED light gives you an exact readout of the RPM at all times.
Specifications:
Motor: TEFC Induction with Delta VFD, Motor Power: 3HP, 220 Volt, 3 Phase, Recommended Breaker: 15 Amp, Swing Over Bed: 24", Dist. Between Centers: 36", Swing Over Tool Rest Base: 20", RPM: 150-3500 (High), RPM: 50-1300 (Low), Floor to Spindle Center Height: 44.5", Headstock Travel: Full Length, Max. Outboard Turning Swing: 38", Spindle Taper: MT#2, Spindle Size: 1-1/4 x 8(RH) TPI, Headstock Through-Bore: 3/8", Headstock Travel: Full Length, Tailstock Through-Bore: 3/8", Spindle Index #: 48, Spindle Bearing: 2 X 6209 Front, 1 X 6208 Rear, Tailstock Taper: MT#2, Spur Center: MT#2, Live Center: MT#2, Hole through Tailstock: 3/8", Tailstock Quill Travel: 4-1/2", Tool Rest Width: 12", Face Plate: 3", Knockout Rod, Comparator, Weight (Net/Ship): 610 Lbs.
Note: This product does not include shipping and will drop ship directly from Laguna Tools. (Drop ship fee is $199). Available to ship in the continental USA only. Not available to ship internationally.