(Click to enlarge)	#1 Morse Taper Mandrel (Adjustable Length) #1 Morse Taper PSI Brand Maxi-Mandrel This 7mm mandrel is compatible with all of the pen kits on our website. The adjustable length makes it nice so you can lengthen or shorten it as necessary. Adjust the length with two 7/8" wrenches (PKMWR) which are not included. This includes a free 7mm HSS Brad Point drill bit! Price: $16.95 ea Item: PKM-ELC Qty:

(Click to enlarge)	#2 Morse Taper Mandrel (Adjustable Length) #2 Morse Taper PSI Brand Maxi-Mandrel This 7mm mandrel is compatible with all of the pen kits on our website. The adjustable length makes it nice so you can lengthen or shorten it as necessary. Adjust the length with two 7/8" wrenches (PKMWR) which are not included. This includes a free 7mm HSS Brad Point drill bit! Price: $16.95 ea Item: PKM-FLC Qty:

(Click to enlarge)	Universal Mandrel for Carba-Tec, Turncrafter Plus, Sears: 3/4" x 16tpi Universal Mandrel for Carba-Tec, Turncrafter Plus, Sears: 3/4" x 16tpi PSI Brand Maxi-Mandrel This 7mm mandrel is compatible with all of the pen kits on our website. This includes a free 7mm HSS Brad Point drill bit! Price: $17.50 ea Item: PKM-AL Qty:

(Click to enlarge)	Universal Mandrel for Delta, Jet, Turncrafter Pro & ProVS: 1" x 8tpi Universal Mandrel for Delta, Jet, Turncrafter Pro & ProVS: 1" x 8tpi PSI Brand Maxi-Mandrel This 7mm mandrel is compatible with all of the pen kits on our website. This includes a free 7mm HSS Brad Point drill bit! Price: $17.50 ea Item: PKM-BL Qty:

(Click to enlarge)	Universal Mandrel for Shopsmith: 5/8" unthreaded Universal Mandrel for Shopsmith: 5/8" unthreaded PSI Brand Maxi-Mandrel This 7mm mandrel is compatible with all of the pen kits on our website. This includes a free 7mm HSS Brad Point drill bit! Price: $17.50 ea Item: PKM-CL Qty:

(Click to enlarge)	Universal Mandrel fits any lathe with a Drill chuck Universal Mandrel fits any lathe with a Drill chuck (aka Jacobs chuck) This 7mm mandrel is compatible with all of the pen kits on our website. This includes a free 7mm HSS Brad Point drill bit! Price: $11.95 ea Item: PKM-DL Qty:

(Click to enlarge)	**BONUS Carbide Offer* Buy any mandrel on this page, and you can get the 7mm carbide tipped drill bit at a discount price of $7! Note: Must be purchased with the mandrel on the same order - Limit 1 bit at this price per mandrel purchased. Price: $7.00 ea Item: DB7MMCT-BONUS Qty:

(Click to enlarge)	Two 7/8" Open Wrenches This pack of two wrenches makes adjusting your Maxi-Mandrel real easy! Price: $5.25 ea Item: PKMWR Qty:

(Click to enlarge)	Replacement Mandrel Rod (EL/FL) This replacement rod is for the PKM-EL/FL mandrels above. Price: $7.25 ea Item: XPKM-ELC Qty:

(Click to enlarge)	Replacement Mandrel Rod (AL/BL/CL) This replacement rod is for the PKM-AL/BL/CL mandrels above. Price: $11.00 ea Item: XPKM-ELC2 Qty:

No Picture	Replacement Brass Knurled Nut (AL/BL/CL) This fits the PKM-AL/BL/CL only. Price: $2.50 ea Item: PKNUT Qty:

No Picture	Replacement Brass Knurled Nut (DL/EL/FL) This fits the PKM-DL/EL/FL only. Price: $3.00 ea Item: PKNUT2 Qty:

(Click to enlarge)

7 Piece Barrel Trimming System An essential step for making a quality pen project is to square the end of your pen tubes before turning. This system includes pilot bores that will fit 7mm, 8mm, 8mm pencil, 10mm, and 3/8" kits and can be used with both a drill press or power drill. The pilot bores work with the included 3/4 inch cutter head to accommodate all pen and small project kit sizes. Price: $33.95 ea Item: PKTRIMKIT Qty:

(Click to enlarge)

7mm Barrel Trimmer Barell trimming is an essential step for making a quality pen project. Its used to square the end of your pen blanks and pen tubes prior to turning on the lathe. The trimmer includes a cutting shaft that fits into a drill chuck or lathe chuck. The shaft will clean the glue from the tubes and act as a pilot for the 3/4" squaring cutter. 7mm basic barrel trimmer Includes 7mm pilot shaft, 5/8" squaring cutter and wrench. Price: $15.95 ea Item: PKTRIM7 Qty:

(Click to enlarge)	Center Finder Center finders make finding and marking the center on either a round or square item a breeze. No math required, no holding the straight edge at what you think is the right place. These handy tools will cut down on prep time and give you more valuable turning time. Price: $5.95 ea Item: CENTFIND Qty:

(Click to enlarge)	Pen Disassembly Punch Set This handy set of punches consists of 28 rods from 3/32 to 17/32. These rods will aid in salvaging kits and barrels that would otherwise be lost. Price: $18.95 ea Item: PKDISET Qty:

(Click to enlarge)	HSS Brad Point Metric 25 piece set A complete set of brad point drill bits in metric sizes from 1mm to 13mm in .5mm increments. Comes in a durable metal case. Price: $23.95 ea Item: PKDBMSET Qty:

(Click to enlarge)	PKDISET and PKDBMSET combo BONUS! Buy the PKDISET and the PKDBMSET together and save! Price: $39.95 ea Item: BRADPUNCH Qty:

(Click to enlarge)	7mm Pen Disassembler Tool 7mm Pen Disassembler Tool is used to remove pressed on parts from assembled pens. Salvages parts and allows refinishing barrels. Works on kits such as Slimline, Comfort, Saturn, Longwood, Designer, etc. Price: $12.50 ea Item: PKDISPEN Qty:

(Click to enlarge)	7mm Pencil Disassembler Tool 7mm Pencil Disassembler Tool is used to remove pressed on parts from assembled pensils. Salvages parts and allows refinishing barrels. Works on kits such as Slimline, Comfort, Longwood, etc. Price: $12.50 ea Item: PKDISPCL Qty:

(Click to enlarge)	10mm Pen Disassembler Tool 7mm Pen Disassembler Tool is used to remove pressed on parts from assembled pens. Salvages parts and allows refinishing barrels. Works on kits such as Cigar, Big Ben, Classic Elite, etc. Price: $9.75 ea Item: PKDIS10 Qty:

(Click to enlarge)	PSI Mini 5 piece HSS Chisel Set This set from PSI is ideal for small detailed turnings. Included are ¼“ roughing gouge, 1/8 “ spindle gouge, ¼ “ round nose scraper, 3/32” parting tool, and a ¼” skew chisel. Price: $24.95 ea Item: LCMINI2 Out of Stock - ETA 3/19/10